Root-Inspired Bio-Interlocking Structure Design and Its Mechanism on Enhancing the Interfacial Bonding of...

The dissimilar combination of NiTi shape memory alloy and Ti6Al4V titanium alloy offers superelasticity, biocompatibility and high specific strength, showing broad application prospects in aerospace and medical fields. However, when fabricating NiTi/Ti6Al4V composite components by multi-material laser powder bed fusion (MM-LPBF), brittle cracks or even complete delamination easily occur at the interface. In this paper, without relying on intermediate interlayer materials, we innovatively propose a root-inspired three-dimensional bio-interlocking interface structure. By means of macroscopic three-dimensional geometric interlocking, the crack propagation path and load transfer mode are forced to change. Using the branching angle (45°, 60°) and the structural size multiplier (1.2, 1.5) as variables, the influence of the bio-inspired geometric parameters on the interfacial forming quality, microstructure and mechanical properties was systematically investigated. The results show that the branching angle is the primary factor determining the performance. The 45° low-angle branched specimens exhibit overall brittle delamination along the flat metallurgical reaction interface under shear loading, with an average shear strength of only 17.47 MPa. In contrast, the 60° high-angle branched specimens, owing to their larger normal embedding depth, exhibit a failure mode transitioning to a mixed mode that includes crack deflection, branch shearing and plastic tearing of the Ti6Al4V matrix. Although TEM confirms that a continuous Ti₂Ni brittle phase still exists at the interface, the optimised 60-1.5 structure increases the average shear strength to 128.37 MPa, which is more than six times higher than that of the 45-1.2 group (17.47 MPa). This "geometrical constraint toughening" strategy provides a new paradigm for the interfacial strengthening of dissimilar metals without relying on metallurgical modification.