Effect of a Recycled Polyethylene Wax/Bio-Oil-Based Reactive Composite Rejuvenator on the Performance Balance...

This study developed a composite rejuvenator comprising recycled polyethylene wax (PREW), waste cooking oil (WCO), and epoxidized soybean oil (ESO) activated by the tertiary amine catalyst BDMA to improve the intermediate-temperature rejuvenation of aged SBS-modified asphalt binder. The binder was subjected to combined rolling thin-film oven and pressure aging vessel aging. Conventional tests, rotational viscosity, bending beam rheometer, multiple stress creep recovery, fluorescence microscopy, and Fourier transform infrared spectroscopy were used to evaluate macroscopic, rheological, and microstructural properties. Aging hardened and embrittled the binder, increased softening point and viscosity, reduced penetration and ductility, and disrupted the polymer-rich phase. PREW reduced flow resistance and retained relatively high-temperature structural stability, whereas WCO improved flexibility and flowability, although excessive softening impaired high-temperature stability. ESO/BDMA treatment was accompanied by changes in oxygen-containing functional group-related absorption regions and improved apparent connectivity of the SBS-rich phase. Among the tested temperatures, 120 °C provided the best overall balance among the evaluated properties, satisfying low-temperature stress-relaxation requirements while limiting high-temperature creep deformation. These results identify 120 °C as the preferred treatment temperature for the PREW/WCO/ESO-BDMA rejuvenation system.