Genetic Algorithm-Assisted Multilayer SPR Refractive-Index Sensor with FASnI₃ Perovskite and Black Phosphorus: A...

Surface plasmon resonance (SPR) sensors translate refractive-index (RI) changes near an interface into measurable angular shifts, but a large shift is useful only when the resonance remains sufficiently narrow and deep. Conventional single-metal SPR structures typically force a trade-off in which sensitivity gains come at the cost of broader resonances or shallower reflectance dips. Here, a BAK1/Cu/Al/BaTiO₃/FASnI₃/BP multilayer SPR refractive-index sensor is proposed and optimized using the transfer matrix method (TMM) coupled with a genetic algorithm (GA). The Cu/Al bimetallic region provides a plasmonic metal core, BaTiO₃ and FASnI₃ progressively enhance the evanescent field, and black phosphorus (BP) forms the analyte-facing sensing interface. To avoid sensitivity-only optimization, the GA uses a composite sensitivity figure (CSF) that integrates angular sensitivity, resonance dip depth, and full width at half maximum as the fitness function. At an analyte refractive index (RI) of 1.355, the sensor reaches a maximum sensitivity of 510.11°/RIU and a CSF of 76.39 RIU^-1. These results establish the GA-CSF framework as a generalizable route to the balanced design of multilayer SPR refractive-index sensors and provide a computationally guided starting point for experimental implementation.