Related Experiment Videos
Bi-objective optimization of simultaneous vibration suppression and energy harvesting in suspension systems based on
Zhongsheng Chen1,2, Yangyi Zhang2, Ankang Wang2
1School of Engineering Science, Shandong Xiehe University, Jinan, Shandong, China.
Abstract:
Simultaneous vibration suppression and energy harvesting (SVSEH) of suspension systems has attracted significant attention over the past few decades. Nevertheless, vibration suppression and energy harvesting often compete with each other due to using single-objective control methods and the tradeoff has limited the effectiveness of current systems. To reduce the tradeoff, the innovation of this paper is to propose a bi-objective control strategy in which vibration suppression and energy harvesting are optimized by two independent objective functions. Firstly, the state equation of the quarter-suspension SVSEH system is derived and nonlinear restoring force is linearized. Then the reduced-tradeoff control of the quarter-suspension SVSEH system is first equivalent to a bi-objective H2-norm optimization subject to an H∞-norm constraint. Next, the mixed H2/H∞ state feedback-based control method is presented in detail and a low-pass filter is adopted to ensure the "strictly proper" condition of H2 control. In the end, a Simulink model is built and the results indicate that it achieves a 6.2% improvement in vibration reduction and a 17.9% increase in energy harvesting compared to existing method. It confirms the proposed method can greatly reduce the tradeoff between vibration suppression and energy harvesting. Consequently, this research can contribute to developing next-generation energy-regenerative suspensions.
Related Concept Videos
PD Controller: Design
Designing a continuous-data controller requires selecting and linking components like adders and integrators, which are fundamental in Proportional,...
Problem Solving: Energy in Simple Harmonic Motion
Consider the spring in a shock absorber of a car. The spring attached to the wheel executes simple harmonic motion while the car is moving on a bumpy road. The force on the...
Concept of Resonance and its Characteristics
Simple Harmonic Motion
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal and...
One-Degree-of-Freedom System
A one-degree-of-freedom system is defined by an independent variable that determines its state and behavior. One example of a one-degree-of-freedom system is a simple harmonic oscillator, such as a...