Study on Molten Pool Dynamic Behavior of Laser-MIG Hybrid Welding for 10CrNiCu Steel Under Different Assembly...

Laser-MIG hybrid welding is increasingly used in shipbuilding for medium-thick steel plates, where assembly-induced gaps and misalignment often compromise weld quality. In this study, a three-dimensional transient numerical model is established to simulate the molten pool dynamics during full-penetration laser-MIG hybrid welding of 10CrNiCu steel under varying gaps and misalignment conditions. The model incorporates coupled heat transfer, fluid flow, keyhole behavior, and droplet transfer and is validated against experimental weld profiles. The simulation results reveal that increasing gap size broadens the heat distribution, reduces keyhole depth, and decreases the bridging capacity of the filler metal. Larger misalignment enhances the step effect, promotes gravity-driven downward flow of liquid metal, and increases keyhole instability and porosity risk. The adaptability to assembly errors is further assessed. As welding current increases, the gap tolerance slightly improves from 1.61 mm to 1.65 mm, whereas the misalignment tolerance markedly decreases from 3.00 mm to 1.82 mm due to the earlier onset of porosity defects. These findings provide quantitative guidance for optimizing welding parameters to accommodate realistic assembly variations in marine steel fabrication.