Demonstration of a 2-18 GHz Multispectral SAR

This paper describes a polarimetric, frequency-modulated continuous wave (FMCW) synthetic aperture radar (SAR) with an ultrawide bandwidth that spans 2-18 GHz. It is being developed as an airborne sensor called SKuSAR. The intent is to generate a set of sub-band images, thereby creating a multispectral SAR. This opens the prospect for new remote sensing algorithms that exploit variations in the scene's polarization/frequency response occurring over the system's three octaves of bandwidth. We describe the SKuSAR hardware and the processing steps applied to the FMCW data to create a multispectral SAR. The approach is practically demonstrated using data collected against calibration targets deployed in a field with the system mounted on a truck. This ground-based arrangement provided an inexpensive solution to test and fine-tune the system hardware and processing algorithms. A few complicating factors specific to the ground-based geometry were encountered, such as multipath signal contamination due to ground reflection and rather short data collections that affected attainable azimuth resolutions. Both these factors were identified and analyzed. The measured characteristics follow theoretical predictions rather well, giving confidence that the system meets its expected nominal performance once airborne, with the mentioned limiting factors absent or of reduced significance.