Related Experiment Video
Updated: Oct 17, 2026

A Fabrication and Measurement Method for a Flexible Ferroelectric Element Based on Van Der Waals Heteroepitaxy
Published on: April 8, 2018
Oxygen Vacancy Engineering for Enhanced Remanent Polarization and Memory Window in a-IGZO/HZO Ferroelectric
Hyojin Yang1, Hwan Jin Kim2, Haneul Lee1
1Department of Intelligence Display Engineering, Yonsei University, Seoul03722, Republic of Korea.
Abstract:
HfO2-derived ferroelectric field-effect transistors (FeFETs) are promising for nonvolatile memory and logic-in-memory applications owing to CMOS compatibility and low-voltage polarization switching. Amorphous InGaZnO (a-IGZO) is attractive for back-end-of-line compatible FeFETs, but inverted bottom-gate devices suffer from incomplete switching under negative gate bias, especially in the nonoverlap metal/ferroelectric/semiconductor (MFS) region where depleted a-IGZO becomes effectively floating and weakens voltage coupling across HfZrOx (HZO). Here, we demonstrate oxygen vacancy (VO)-mediated activation of negative-bias switching in a-IGZO FeFETs. The oxygen-deficient state of the bottom a-IGZO layer was controlled by sputtering oxygen flow ratio and rapid thermal annealing oxygen partial pressure. Depth-profile X-ray photoelectron spectroscopy confirms VO modulation near the a-IGZO/HZO interface. Positive-up-negative-down measurements and area-engineered capacitor test element groups show that VO-rich a-IGZO enhances reversible MFS switching by supplying compensating positive charge under depletion, thereby enlarging the memory window and improving switching behavior. This approach directly mitigates geometry-induced switching loss in practical oxide-semiconductor FeFET architecture.
Related Concept Videos
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no current...
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the gate...
Biasing of P-N Junction
In equilibrium, no external voltage is applied across the p-n junction. The depletion region is formed at the junction interface due to the diffusion of carriers, which leaves behind charged dopants, acceptors on the p-side, and donors on the n-side. These immobile charges create an electric field that prevents further diffusion of carriers. The related energy band...
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity arises...

