Related Experiment Video
Updated: Oct 25, 2026

Waste Water Derived Electroactive Microbial Biofilms: Growth, Maintenance, and Basic Characterization
Published on: December 29, 2013
Is Electro-Stimulation Always Effective for Methanogenesis? A Holistic Assessment of Electric Potential and Current
Sijia Chen1, Xinran Meng1, Ziwei Liu1
1State Key Laboratory of Regional Environment and Sustainability, School of Environment, Tsinghua University, Beijing100084, China.
Abstract:
Electro-stimulated anaerobic digestion (EAD) typically relies on voltage-only regulation, neglecting the impacts of the associated response current, particularly in highly conductive systems. Herein, we investigated an EAD system for treating iron-containing sludge digestate. Unexpectedly, under appropriate applied voltages of 0.9 to 1.2 V, the high conductivity triggered excessive currents, which subsequently inhibited methanogenesis. By decoupling the dual potential-current effects, integrated with metatranscriptomics analysis, we revealed that excessive currents induced severe, localized oxidative stress on anodic biofilms (up to 2.3-fold of the CF group) and hindered carbon metabolism. Concurrently, lower cathodic potentials triggered microenvironmental alkalinization, accelerating calcite and ankerite deposition, which increased the mass transfer resistance by up to 1.4-fold. Consequently, the positive biological effects of electro-stimulation (e.g., Geobacter enrichment, upregulated methanogenic genes) were counterbalanced by these current-induced physical and biochemical barriers. This study highlights the necessity of comanaging electric potential and current when deploying electro-microbial technologies in highly conductive systems toward energy-efficient AD facilities.
Related Concept Videos
Controlled-Potential Coulometry: Electrolytic Methods
The chosen potential ensures...
Microbial Fuel Cells
Electrogravimetric Analysis: Overview
To test the completeness of the...
Processes at Electrodes
Electrochemical Systems
Electrodes: Overview
There are two main types of electrodes in electrochemical cells. The first type, known as the working or indicator electrode, has a potential that is sensitive to the analyte's concentration and reacts to changes in the...

