Evaluation of dust exposure in asbestos cement manufacturing operations

Previous investigations of the health of workers of the asbestos cement industry have demonstrated dose-response relationships for the diffuse radiographic changes of asbestosis and pulmonary function impairment. Studies of the mortality experience of past employees have also identified levels of cumulative exposure above which an excess of respiratory cancer could be detected. These epidemiologic studies were based on particulate concentrations determined by the midget impinger. We attempted to develop information that might lead to conversion of particulate to fiber concentrations in the industry in order that the risk assessment could be related to the current membrane filter methods. Pairs of impinger and membrane filter samples were taken in the various areas of the plant. Personal samples were also taken to determine the current exposure of workers. The ratio of fiber concentration to particle count varied from 0.63 to 2.5. Por correlation (0.18) was obtained at low fiber and particle counts and good correlation (0.91) was demonstrated in dustry areas where asbestos and silica were handled in a dry form. The concentration of fibers in 80% of the personal samples was less than 2 fibers/cc, and 60% were less than 0.5 fibers/cc. The results also show that no one conversion factor can be used for all areas of this type of operation.