Permeability of surgeons' gloves to methyl methacrylate

The quick passage of methyl methacrylate at 21 degrees C and 35 degrees C through seven surgeon's glove materials in a diffusion chamber was quantified by gas-chromatographic analysis. Polystyrene-butadiene dissolved in methyl methacrylate, latex and polychlorobutadiene showed reversible expansion, during which material from the samples dissolved. In order to prevent these phenomena from interfering with the analyses, experiments were performed with 4.7 M methyl methacrylate in ethanol. Even then, the time in which methyl methacrylate permeated the membrane was too short for sufficient protection. When using these gloves, the orthopaedic surgeon who is fixing endoprostheses is no doubt occlusively exposed to methyl and other methacrylates, benzoyl peroxide, rubber additives, etc. Of glove materials which are not surgically used, vinyl was inferior to latex, whereas a very thin polyethylene copolymer did not change in methyl methacrylate, showed better resistance to diffusion, but was insufficiently elastic and easily perforated. A better protective material is urgently needed.