Small computer algorithms for comparing therapeutic performances of single-plane iridium implants

We present a uniform method for selecting an optimum implant geometry by presenting techniques for evaluating the therapeutically significant maximum dose rate (herein referred to as the "maximum dose rate"), the reference isodose (85% of the maximum dose rate), and the area enclosed by the reference isodose contour. The therapeutic performances of planar iridium implants may be compared by evaluating their respective maximum dose rates, reference isodoses , and areas within the reference isodose contours. Because these parameters are mathematically defined, they reproducibly describe each implant geometry. We chose a small microcomputer to develop these comparison algorithms so that the radiotherapist need not have large, expensive computer facilities available to conduct his own studies. The development of these algorithms led to some significant conclusions and recommendations regarding the placement of interstitial implants. Using seeds that are centrally located in the array to evaluate the maximum dose contour avoids underestimating the array's maximum dose rate. This could occur if edge or corner seeds were used. Underestimating the maximum dose rate (and hence the reference isodose contour area) may have a serious therapeutic outcome, because the actual total treatment dosage may be excessive. As ribbon spacing is increased, there is a point beyond which the reference isodose contours become decoupled. At this point, a single relatively uniform reference isodose contour separates into several contours. This effect not only complicates the planimetry calculations, but it also adversely affects the therapeutic efficacy of the implant by producing therapeutically "cold" regions.