Determination of hematocrit based on diffusion of an inert molecular probe from agarose gels into whole blood

Whole blood hematocrit was determined by an approach which depends on the diffusion of an inert probe, to which red blood cells are impermeable, from a small agarose gel into a stirred, much larger blood sample. Blood cells influence the diffusion rate of the probe by, on the average, physically blocking a fraction of the gel surface. The blocking effect increases with the hematocrit. Cyanocobalamin (B-12) was found to be a suitable probe because it did not penetrate, bind to, or lyse blood cells and was not bound by plasma solutes. The loss of B-12 from gels in contact with blood was monitored by determination of the absorbance change at 540 nm of gels which had been quickly rinsed. The visible spectrum of B-12 in agarose gels was identical to the spectrum in water. Beer's Law was obeyed in 1-mm thick agarose gels over a concentration range of 0.1-0.8 mM. Based on the results from 48 blood samples covering the hematocrit range 25-69, a least-squares line was generated with a slope, -3.46 X 10(-3) delta A/hematocrit unit, a Y intercept of 0.295, and a correlation coefficient of 0.971. The precision of the technique was +/- 9.7%. The assay was insensitive to mean corpuscular volume and sample volume as long as the latter was 50-fold larger than the gel volume. The diffusion coefficient for B-12 in 1% agarose gels was found to be 1.4 +/- 0.2 X 10(-6) cm2 sec-1.