Rapid inoculum standardization system: a novel device for standardization of inocula in antimicrobial susceptibility...

A rapid inoculum standardization system for antimicrobial susceptibility testing without incubation or the conventional turbidity adjustment has been developed. The rapid inoculum standardization system consists of a plastic rod with cross-hatched grooves on one end and a specific nutrient medium in a vial. The crosshatched grooves are designed to pick up and release a known number of viable microorganisms. In use, the end of the rod is touched to five colonies 1 to 2 mm in diameter from a primary agar plate, thus filling the grooves with bacteria. The rod is placed into the vial, and the bacteria are suspended in the medium by agitation with a Vortex Genie Mixer. The resulting suspension contains 5 X 10(7) to 5 X 10(8) CFU/ml for most gram-negative bacilli and gram-positive cocci. Microorganisms such as streptococci that have colonies less than 1 mm in diameter require as many as 10 colonies for an adequate inoculum suspension. Ninety-five commonly encountered bacterial isolates were tested in triplicate by agar plate counts. The resulting overall geometric mean of the agar plate counts was 1.52 X 10(8) CFU/ml for the species tested. We have found that the rapid inoculum standardization system provides a consistent and reproducible method for the standardization of inoculum for antimicrobial susceptibility testing without the incubation period and turbidity adjustment.