Related Experiment Video
Updated: Aug 4, 2026

Preparation and Observation of Thick Biological Samples by Scanning Transmission Electron Tomography
Published on: March 12, 2017
Quantitative electron probe microanalysis of biological thin sections: the use of stem for measurement of local mass
Abstract:
A method for performing quantitative electron probe microanalysis on ultrathin (less than 30 microgram/cm2) biological samples is described and evaluated. The technique is based on a measurement of the characteristic peak count rate and the degree of beam attenuation as the primary electron beam passes through the sample. Using this method it is possible to measure the concentration of a given element such as sodium in sections ranging in mass-thickness from several microgram/cm2 up to 30 microgram/cm2 with an accuracy of better than 10%. For sections having a mass thickness of approximately 11 microgram/cm2 the minimum detectable concentration for sodium was found to be 20 mmolar or 4 X 10(-2) wt.%. The interaction of the electron beam with the sample is also discussed with emphasis on characterizing the variation in sample mass with radiation dose.
Related Concept Videos
Scanning Electron Microscopy
Fundamental Principles
Accelerated...
Preparation of Samples for Electron Microscopy
Electron Microscope Tomography and Single-particle Reconstruction
Electron Tomography
Electron tomography can be performed either in TEM or STEM (scanning transmission...
Overview of Microscopy Techniques

