[Suggestions for the design of a modern anomaloscope]

Three variants of a new anomaloscope principle are described. This principle is distinguished by the fact that for generation of the mixed color and the reference color three interference filters with narrow band widths are used instead of an expensive dispersion prism. In the first variant the brightness of the mixed color field and the reference field is determined by three detectors (silicon diodes) and kept constant taking the relative spectral response into consideration. The degree of anomalous color vision present is indicated digitally by a microprocessor whose interface also permits data processing equipment to be connected. The second variant uses only one detector which sequentially pulses the three light sources and distributes the results to different signal channels for further processing. In the third variant, measurement is performed in the same way as in the second variant but with only one light source. Fiber optic bundles illuminate of the mixed color and reference fields and also permit adaptation of the eye to neutral. In this case additional optical attenuators are required to keep the luminance of the fields constant. An advantage shared by all three variants is that they have virtually no moving parts, employing monochromatic filters and cemented prism blocks with high-quality electronics. This has made it possible to produce a compact, rugged and efficient new-generation anomaloscope, which renders the considerable calibration and maintenance work previously necessary superfluous.