The 'light scattering factor'. Importance of stimulus geometry, contrast definition, and adaptation

Paulsson and Sjöstrand have suggested that the light scattering factor (LSF) can be estimated by using the equation: LSF = L/E (M2/M1-1). Here L is the space average luminance of the target, E is the illuminance of the glare source, and M2 and M1 are modulation contrast thresholds in the presence and absence of the glare source. To compensate for change of adaptation. Abrahamsson and Sjöstrand later modified the above equation by introducing a correction factor (CF): LSF = L/E ((CF) (M2/M1-1). The purpose of this study is to analyze the validity of the above equations.

The importance of stimulus geometry, contrast definition, background luminance, and glare illumination is studied through theoretical analysis and comparison with earlier studies. Stimulus geometry and contrast definition are studied through optical modeling. Adaptation is modeled according to the laws of Weber and DeVries-Rose.

The choice of contrast definition may corrupt the result by a factor of 2. At background luminance levels above approximately 10 cd/m2, the Paulsson-Sjöstrand equation agrees well with theory. At lower background levels, the Abrahamsson-Sjöstrand equation is used with correction factors derived from adaptation measurements. Using this equation and earlier published data from glare testing performed at 2 cd/m2, the results are found to be in fair agreement with the light scattering theory.

Glare testing using the Paulsson-Sjöstrand equation is found to be valid as long as the measurements are performed at high luminance levels (above 10 cd/m2), with targets of low spatiotemporal frequencies (e.g., 2 cpd and 1 Hz) and with the use of a properly chosen definition of contrast. At lower luminance levels, the Abrahamsson-Sjöstrand equation may be used with well-derived correction factors.