Preliminary effects of in vitro lipid exposure on absorbable poly(ortho ester) films

Bioabsorbable films show promise in preventing postoperative interfacial tissue adhesion. Absorbable polymers in film form are generally more sensitive to chemical environments, due to their large surface area to volume ratio. The in vivo environment contains lipids such as cholesterol, triglycerides, and phospholipids, which are known to affect the degradation of permanent and absorbable polymeric biomaterials. Preliminary investigations of in vitro lipid exposure of bioabsorbable poly(ortho ester) (POE) films for implant use are described. POE has been studied previously for use in controlled drug delivery and fracture fixation. Six-week in vitro exposure of 65:35 POE films to a cholesterol emulsion (1 g/L) showed no apparent difference in hydrolytic degradation rates of mechanical properties or mass loss compared to deionized water exposed films. Decreases of 28 and 6% in inherent viscosity were observed after 5 weeks for cholesterol and deionized water exposed films, respectively, suggesting cholesterol may have some effect. Further examination of the data, due to sample variation, revealed that clear, uniform films showed only minor changes in mass loss and mechanical properties after 6 weeks in either of the in vitro media. But slightly cloudy films possessing microscopic bubbles showed accelerated degradation in both media, indicating the effect of cholesterol was inconclusive due to sample variation. Control of the microbubble formation process could have utility in controlling hydrolytic degradation of POE films.