Contact pressure prediction in total knee joint replacements. Part 1: General elasticity solution for elliptical...

A general elasticity contact theory has been developed to predict the contact area and the contact pressure in total knee joint replacements with elliptical contacts where the thickness of ultra high molecular weight polyethylene (UHMWPE) is similar or less than the contact half width. The interfacial boundary condition between the UHMWPE component and the underlying metal substrate has been considered to be either perfectly bonded or perfectly unbonded in the model. Poisson's ratio for UHMWPE has been assumed to be 0.3 or 0.4. The effect of the thickness of the UHMWPE layer on the contact area and the contact pressure has been examined. The predictions of the maximum contact pressure and the contact area have been presented in non-dimensional forms and can readily be applied for typical design configurations of current total knee joint replacements. Furthermore, the present results can readily be applied to design considerations for total knee joint replacements to reduce contact stresses within the UHMWPE component.