The EPC approach to estimating safety from exposure to environmental chemicals

Reference doses (RfDs) and reference concentrations (RfCs) developed by the United States Environmental Protection Agency (USEPA) are typically used in the quantitation of risk of potential adverse human health effects from exposure to environmental chemicals. For a large number of chemicals, however, USEPA RfDs and RfCs have not yet been determined. Thus, for risk assessments that involve a large number of chemicals, there is insufficient toxicity information with which to evaluate potential adverse human health effects for all chemicals present at a particular site. Due to this insufficiency, the risk assessor must either (1) ignore potential exposures on the assumption that omitting these exposures does not significantly alter decisions concerning the remediation of the site or (2) undertake a lengthy and costly analysis to generate the necessary RfDs or RfCs. A potential solution to this problem is to develop estimated permissible concentrations (EPCs), values which represent permissible environmental concentrations or related acceptable daily dosages derived from occupational exposure limits. In the present analysis, acceptable daily dosages determined using the EPC method were compared to USEPA RfDs or RfCs which were converted to dosages based on standard exposure assumptions. Based on a comparative analysis of EPCs and USEPA reference values for 103 chemicals, it was found that EPC daily dosages represent a reasonably conservative surrogate value when USEPA or state reference values are unavailable. Given that there are hundreds of chemicals with occupational exposure limits but no state or USEPA reference values, acceptance of the EPC methodology would provide an interim solution for the problem of insufficient toxicity information for a substantial number of environmental chemical contaminants.