Effect of non-steady-state perfusion on xenon-133 cerebral blood flow measurements: an analytical study

Activation studies employing the noninvasive xenon-133 technique are widely used to investigate the cerebral circulation. Typical examples are the investigation of hemispheral specialization of higher cortical function with cognitive activation or the assessment of the hemodynamic reserve in occlusive cerebrovascular disease by CO2 inhalation. Traditionally, in studies using this technique, there is the requirement of a circulatory steady state during the measurement. Due to limitations in the duration of the stimulus or habituation to the stimulus, the basic assumption is often violated. In this study we investigated with the aid of a computer model to what extent blood flow measurement results are affected by non-steady-state blood flow. The findings indicate that cortical activation need not extend throughout the whole measurement to be detectable. Maintenance of activation for at least 5 min is sufficient for a successful measurement. In addition, the results show that the activation should be fully established when the measurement starts to achieve maximal sensitivity. Delay in activating the circulation will result in attenuated responses, especially if the stimulus is delayed beyond 2 min.