Airborne concentrations of asbestos in non-occupational environments

Concentrations of asbestos in air were determined from analysis of samples collected in over 300 buildings involved in litigation. Samples were collected by certified industrial hygienists and analysed in certified laboratories by transmission electron microscopy. Building group mean concentrations of asbestos in building air inhaled by occupants were generally less than 0.0005 f ml-5 > 5 microns (90th percentile). At these concentrations the risk from asbestos exposure would be very low for building occupants. Another data set was obtained from the maintenance logs kept by owners of buildings containing asbestos fireproofing and subject to Operations and Maintenance Programmes to evaluate asbestos inhalation risk to maintenance workers. The logs were kept to document protective measures and maintenance personnel exposures during 1991-1992. Data are presented for one commercial building, which is typical of data for three additional commercial buildings and a medical centre. All samples were evaluated by the NIOSH 1400 protocol for sampling and analysis by phase contrast microscopy. Operations and maintenance precautions to reduce dust emission were modest; they included spraying of ceiling tiles with amended water, HEPA vacuuming tile edges before entry and after tile replacement, respirator usage and careful work. Negative pressure containment was not used. In this building personal exposures in electrical/plumbing work ranged from 0.000 to 0.035 f ml-1 > 5 microns in length (average work time of one job was 118 min); the 8-h TWA was 0.0149 f ml-1 > 5 microns.(ABSTRACT TRUNCATED AT 250 WORDS)