Finite element computations of specific absorption rates in anatomically conforming full-body models for hyperthermia...

Finite element techniques for three-dimensional specific absorption rate (SAR) computation in anatomically based human models are presented. The formulations center on Helmholtz weak forms which have been shown to be numerically robust and to afford additional sparsity in the resulting system of algebraic equations. Practical solution of these equations depends critically on the realization of an effective sparse matrix solver. Experience with several conjugate gradient-type methods is reported. The findings show that convergence rate (and even convergence in some cases) degrades significantly with increasing matrix rank and decreasing electrical loss for mesh spacings which adequately resolve the physical wavelengths of the electromagnetic wave propagation. However, with proper choice of algorithm and preconditioning, reliable convergence has been achieved for matrix ranks exceeding 2 x 10(5) on domains having sizeable volumes of electrically lossless regions. An automatic grid generation scheme for constructing meshes which consist of variable element sizes that conform to a predefined set of boundaries is discussed. Example meshes of homogeneous and heterogeneous human anatomies, the boundaries of which have been derived from CT-scan information, are shown. These results highlight the fact that 3D finite element mesh generation remains a difficult problem, but usable meshes with this level of complexity can be generated. Integration of the finite element formulation, the sparse matrix solver, and the mesh generation scheme is shown to lead to algorithms that can be implemented on inexpensive reduced instruction set computer (RISC) workstations with run times on the order of hours. An example of hyperthermia device simulation is presented which suggests that the finite element method is a practical alternative that rivals the impressive finite-difference time-domain (FDTD) computations that have appeared.