An electromechanical breathing device for minimal particle loss while inhaling aerosols
Related Experiment Video
Updated: Nov 8, 2026

A Novel Inhalation Mask System to Deliver High Concentrations of Nitric Oxide Gas in Spontaneously Breathing Subjects
Published on: May 4, 2021
O A Lindahl1, B Rudell, T Bäcklund
1Department of Biomedical Engineering, University Hospital, Umeå, Sweden.
Abstract:
The design of an electromechanical breathing mask that minimizes particle loss during inhalation of aerosols from a provocation box is described. The device measures air flow by means of an anemometer. A provocation example is depicted and the possibility of measuring the provocation dose is discussed. The breathing device here described has been shown to be easy to use and to give reliable results.
Related Concept Videos
Inhaled Medications
Mechanical Ventilation II: Invasive Ventilation
Negative-Pressure Ventilators
Negative-pressure ventilators create a vacuum around the chest or body to draw air into the lungs, simulating breathing. This method does not require an...
Cardiopulmonary Resuscitation II: ACLS Airway Management
Oxygen Delivering System II: Venturi Mask and Transtracheal Oxygen
Venturi Mask
The Venturi mask, named after the Venturi effect, is designed to deliver precise oxygen concentrations. It consists of a large tube with an oxygen inlet that narrows down, causing a pressure drop that pulls air in through adjustable side ports. The mask is a lightweight,...
Mechanical Ventilation III: Noninvasive Ventilation
Noninvasive Positive-Pressure Ventilation (NIPPV)
Oxygen Delivering System I: Nasal Cannula and Face Mask
Nasal Cannula
A nasal cannula is a lightweight tube split at one end into two prongs and placed in the nostrils. It is typically used to deliver low to medium levels of oxygen.
Suggested flow rate: The suggested flow rate for a nasal cannula typically ranges between 1 and 6 L/min.
Oxygen percentage setting:...

