Computer simulations of stress-related bone remodeling around noncemented acetabular components

The authors have used computer modeling techniques to examine stress-related bone changes in the acetabular region. Using a previously developed theory for bone development and adaptation, the authors simulated the distribution of bone density in the natural pelvis as well as changes in bone density following total hip arthroplasty. The geometry of the finite element model was based on a two-dimensional slice through the pelvis. Starting from a solid, homogeneous structure, the computer simulations predicted the distribution of bone density throughout the natural pelvis. The predicted bone density distribution in this first simulation agreed well with the actual bone density distribution only when loads representing multiple activities were incorporated. Using the predicted density distribution as a starting point the authors modified the finite element models to study two designs of noncemented, metal-backed acetabular cups. The simulations with fully fixed bone-implant interfaces predicted extensive loss of bone density medial and inferior to the prosthetic components. The simulations with loose interfaces led to more moderate losses of bone density, indicating a load transfer more similar to that which occurs in the natural joint. The differences in simulated bone remodeling between the two component designs were quite minimal. These results indicate that acetabular components with full bony ingrowth may induce significant stress-related bone remodeling due to a nonphysiologic transfer of load.