Permanent cardiac pacing with electrodes of a new type of fixation in the endocardium

To improve electrode construction the following main problems have been considered: (1) reliable initial fixing in the endocardium, and (2) reducing the area of contact surface and improving threshold values. In this article we have described three original electrodes: 1) an endocardial electrode with a multi-edged tip (contact area 28 mm2), which gives high electric field strength and low thresholds; 2) a spreading tip electrode, which was created on the basis of morphological data. The tissues grow into the spread spaces of this tip and ensure better stability (contact area 17.8 mm2); and 3) a double-screw-in electrode which differs from the other corkscrew types. The contact end (surface area--10.4 mm2) consists of two sickle-shaped hooks. The sickle handle is 0.7 mm in length which prevents further hook penetration in the wall of the heart. It was found that a multi-edged electrode and electrodes supplied with a fixation device are, in terms of energy consumption, more effective compared to electrodes with spherical or cylindrical tips of the same area of contact surface. The double-screw-in endocardial electrode has useful features: reliable fixation and a small contact surface area and, therefore, a low threshold value. Thirty-five double-screw-in electrodes were inserted into an atrial position and 28 into a ventricular position. We have not observed any displacement of such electrodes during the past two years.