Applications of medium-voltage STEM for the 3-D study of organelles within very thick sections

Scanning transmission electron microscopy at 300kV enables the visualization of nucleolar silver-stained structures within thick sections (3-8 microns) of Epon-embedded cells at high tilt angles (-50 degrees; +50 degrees). Thick sections coated with gold particles were used to determine the best conditions for obtaining images with high contrast and good resolution. For a 6-microns-thick section the values of thinning and shrinkage under the beam are 35 to 10%, respectively. At the electron density used in these experiments (100e-/A2/s) it is estimated that these modifications of the section stabilized in less than 10 min. The broadening of the beam through the section was measured and calculations indicated that the subsequent resolution reached 100 nm for objects localized near the lower side of 4-microns-thick sections with a spot-size of 5.6 nm. Comparing the same biological samples, viewed alternately in CTEM and STEM, demonstrated that images obtained in STEM have a better resolution and contrast for sections thicker than 3 microns. Therefore, the visualization of densely stained structures, observed through very thick sections in the STEM mode, will be very useful in the near future for microtomographic reconstruction of cellular organelles.