Bacterial adhesion measurements on soft contact lenses using a Modified Vortex Device and a Modified Robbins Device

S. marcescens 8100 and P. aeruginosa 15442 were used to study bacterial adhesion to hydrogel contact lenses which had not been worn. Bacterial removal from unworn lens materials was assessed with a calibrated vortex device modified with a digital rpm readout and fitted with a test tube attachment (MVD). The MVD, which relies on a whirlpool-like force to remove the bacteria, showed that bacteria adhered to the same degree to etafilcon A, vifilcon A and polymacon lenses under standardized conditions. Tracking the isoenzyme patterns of these bacterial species over time showed instability of S. marcescens upon repeated passage. This instability was not evident with P. aeruginosa. Bacterial adhesion of P. aeruginosa 15442, to human worn and unworn etafilcon A materials was determined with a Modified Robbins Device. The MRD was closed off at both ends stopping medium and bacterial movement after 1 h of fluid flow over the lens surface. The results show that immediately following this 1-h period more bacteria adhere to unworn contact lenses than to worn lenses. However, bacterial counts were equivalent on worn and unworn lenses following 5 h of static incubation.