Aerospace air pollution issues

R E Patterson1, R B Rayman

  • 1Aerospace Medical Association, Alexandria, VA 22314, USA.

Related Concept Videos

Atomic Absorption Spectroscopy: Atomization Methods01:25

Atomic Absorption Spectroscopy: Atomization Methods

Atomic Absorption Spectroscopy (AAS) atomizes samples through flame atomization or electrothermal atomization. Flame atomization typically involves a nebulizer and spray chamber assembly to combine the sample with a fuel–oxidant mixture, creating a fine aerosol mist that enters a burner. Typically, the fuel and oxidant are combined in an approximately stoichiometric ratio. However, for atoms that are easily oxidized, a fuel-rich mixture may be more advantageous. Only about 5% of the aerosol...
Atomic Absorption Spectroscopy: Interference01:25

Atomic Absorption Spectroscopy: Interference

Interference leads to systematic error in atomic absorption (AA) measurements by enhancing or diminishing the analytical signal or the background. These interferences can be grouped into three main categories: spectral interference, chemical interference, and physical interference.
Spectral interference occurs when signals from other elements or molecules overlap with the analyte signal, falsely elevating or masking the analyte's absorbance. This interference can be corrected using Zeeman,...
Atomic Emission Spectroscopy: Interference01:30

Atomic Emission Spectroscopy: Interference

In atomic emission spectroscopy (AES), high-temperature atomizers excite a broad range of elements and molecules that generate complex emissions from sources such as oxides, hydroxides, and flame combustion products in the flame or plasma. Several strategies can be employed to minimize spectral interferences caused by overlapping emission lines or bands. These include increasing instrument resolution, choosing alternative emission lines, optimally placing the detector in low-background regions,...
Factors Affecting Pulmonary Ventilation01:19

Factors Affecting Pulmonary Ventilation

Besides the pressure difference between the external environment and the lungs, the airflow rate and ease of pulmonary ventilation are also influenced by three other factors: surface tension of the fluid in the alveoli, compliance of the lungs, and airway resistance.
Alveolar Surface Tension
The alveolar fluid lines the luminal surface of the alveoli and exerts a force called surface tension. This force is caused by the polar water molecules in the liquid being more strongly attracted to each...
Asthma-I: Introduction01:29

Asthma-I: Introduction

Asthma is a chronic respiratory ailment that requires careful management due to its varying symptoms and influencing factors. It is characterized by airway inflammation, bronchial hyperresponsiveness, and reversible airflow obstruction, leading to symptoms like wheezing, shortness of breath, chest tightness, and coughing. The symptom frequency and intensity may vary considerably over time. It is also linked to immune system responses to allergens and irritants, highlighting the complex...
Microbial Bioremediation of Pesticides01:28

Microbial Bioremediation of Pesticides

Pesticides often feature structurally complex chemical architectures, incorporating halogen groups and multiple aromatic rings. These characteristics confer high chemical stability, rendering many pesticides resistant to natural degradation processes. This resistance poses significant environmental concerns, as persistent pesticide residues can accumulate in ecosystems and affect non-target organisms.Despite the inherent stability of many pesticides, certain microorganisms possess the metabolic...