In vitro and finite-element model investigation of the conductance technique for measurement of aortic segmental...

This investigation examined the feasibility of applying the conductance catheter technique for measurement of absolute aortic segmental volume. Aortic segment volume was estimated simultaneously in vitro by using the conductance catheter technique and sonomicrometer crystals. Experiments were performed in five isolated canine aortas. Vessel diameter and pressure were altered, as were the conductive properties of the surrounding medium. In addition, a three-dimensional finite-element model of the vessel and apparatus was developed to examine the electric field and parallel conductance volume under different experimental conditions. The results indicated that in the absence of parallel conductance volume, the conductance catheter technique predicted absolute changes in segmental volumes and segmental pressure-volume relationships that agreed closely with those determined by sonomicrometry. The introduction of parallel conductance volume added a significant offset error to measurements of volume made with the conductance catheter that were nonlinearly related to the conductive properties of the surrounding medium. The finite-element model was able to predict measured resistance and parallel conductance volume, which correlated strongly with those measured in vitro. The results imply that absolute segmental volume and distensibility may be determined only if the parallel conductance volume is known. If the offset volume is not known precisely, the conductance catheter technique may still be applied to measure absolute changes in aortic segmental volume and compliance.