Determination of kinetic and retention properties of cartridge and disk devices for solid-phase extraction

The kinetic properties of cartridge and disk solid-phase extraction devices are determined by forced-flow liquid chromatography. Typical cartridges provide about 5-15 theoretical plates per cm of bed height and particle-loaded membranes provide about 4-9 theoretical plates for a 0.5-mm-thick membrane. It is shown that cartridge devices fail to provide their maximum trapping performance because of inadequate packing density and that the required packing density could be easily achieved in practice with particles of a standard size. The retention properties of common sorbents for extraction from water and air are characterized with the solvation parameter model. For predominantly aqueous solutions a favorable cavity term results in increased retention while polar interactions tend to reduce retention. Retention on porous polymer sorbents is more complicated because of their capacity to absorb significant amounts of the sample processing solvent resulting in solvent-dependent changes in retention properties. For trapping organic volatiles from air cavity formation and dispersion interactions are important, and in the case of Tenax its capacity for induction interactions is also significant.