Impulse response of a dental implant in bone by numerical analysis

The osseointegration process of titanium dental implants in bone has been simulated previously using natural frequency and impulse excitation. However, the impulse strength was arbitrarily chosen and may not have yielded the correct frequencies and displacements to be compared with those measured in a clinical situation. In this work the range of impulse excitation strengths applied to a dental implant osseointegrated in bone and the corresponding response have been examined using the finite element method. Both conditions of a dental pin only and a dental pin with attached cantilever integrated in the mandible have been examined. The dynamic analysis indicated that the frequency and displacement responses are indeed sensitive to impulse duration and direction but independent of impulse load. The analysis summarizes the proper impulse excitation values for a correct interpretation of clinically measured frequency response data.