Influence of blood flow on adsorption of beta2-microglobulin onto AN69 dialyzer membrane

Adsorption onto the dialyzer membrane is a contributing factor to the elimination of beta2-microglobulin (beta2M) from the sera of uremic patients. The purpose of this prospective study was to ascertain the influence of the blood flow rate on adsorption of beta2M onto the polyacrylonitrile (AN69) hollow-fiber dialyzer membrane in 8 patients during regular hemodialysis (HD). Blood first passed through a low-flux polysulfone dialyzer and then through an AN69 dialyzer, which was not in contact with the dialysis fluid. During the investigation period (first hour of the HD session), the blood flow rate was 100 ml/ min (first part of the study), 200 ml/min (second part of the study), and 300 ml/min (third part of the study). Ultrafiltration was not performed during the investigation period. At the start of the HD sessions, the serum concentration of beta2M in the afferent blood line did not differ significantly among the 3 parts of the study. Serum beta2M was measured in samples taken from the afferent and efferent blood lines of the AN69 dialyzer at 5, 10, 15, 30, 45, and 60 min. The serum beta2M concentration decreased significantly in blood that had passed through the AN69 dialyzer. This decrease, indicating membrane adsorption, was maximal during the first part and minimal during the third part of study. The decrease in the contact time between the blood and the AN69 could be the underlying cause. The calculated quantities of beta2M adsorbed onto the AN69 membrane (44.2 +/- 10.2, 43.2 +/- 12.1, and 42.6 +/- 17.3 mg) did not differ significantly among the 3 parts of the study. These results suggest that an increase in blood flow rate from 100 to 300 ml/min did not significantly affect the quantity of beta2M adsorbed onto the AN69 membrane.