Initial experience with soft-copy display of computed radiography images on three picture archive and communication...

We recently installed picture archive and communication systems (PACS) from three different vendors on our campus for evaluation. A major part of this evaluation involved assessing the capabilities of these systems for displaying computed radiography (CR) images for primary interpretation. The three PACS provided different functionality for CR image display in terms of availability of the proprietary Fuji CR image processing algorithms, availability of user-specified contrast look-up tables, and application of the processing at the time of CR image capture or image display. We found that the Fuji processing algorithms were important for printing film, but were not necessary for acceptable soft-copy display. Non-linear contrast processing produced superior results compared to simple linear processing (via standard window width and level controls). Display processing was best applied immediately prior to the display operation, as opposed to at the image capture time. This allows the display to be adjusted to demonstrate the full 10-bit range of the CR image, and also allows raw CR data (i.e. not optimized for any particular display device) to be stored in the long-term archive.