Robotic solid-phase extraction of amphetamines from urine for analysis by gas chromatography-mass spectrometry
K McCambly1, R C Kelly, T Johnson
1Associated Pathologists Laboratories, Las Vegas, Nevada 89119, USA.
Abstract:
We have evaluated the use of the Hamilton Microlab 2200 robotic pipetting system modified to conduct solid-phase extractions of amphetamines from urine. The Hamilton system is a programmable XYZ robotic sample handling instrument compatible with commercial solid-phase extraction (SPE) columns in the most commonly available sizes. During the extraction and elution steps, the system delivers programmable positive pressure with pressure controlled feedback so as to ensure consistent recovery. The system increases sample throughput while reducing technician hands-on time and improving sample-to-sample and batch-to-batch consistency. In comparison with the manual SPE method, the automated scheme provides similar analyte recovery, accuracy, and precision and a reduced potential for laboratory errors. The method's upper limits of linearity, detection, and lquantitation were, respectively, 10,000, 100, and 100 ng/mL for amphetamine and 25,000, 50, and 50 ng/mL for methamphetamine. Extraction recoveries for the compounds ranged from 88 to 101%. Carryover amounted to less than 0.02% even at 50,000 ng/mL concentrations of analyte. A typical automated run required 20 min of technician time versus 90 min for a corresponding manual SPE procedure. The automated procedure proved to be a reliable and labor-efficient addition to the laboratory.
More Related Videos
10:17High-throughput and Comprehensive Drug Surveillance Using Multisegment Injection-Capillary Electrophoresis-Mass Spectrometry
Published on: April 23, 2019
05:31Gas Chromatography-Mass Spectrometry Paired with Total Vaporization Solid-Phase Microextraction as a Forensic Tool
Published on: May 25, 2021
Related Concept Videos
Gas Chromatography–Mass Spectrometry (GC–MS)
A gas chromatograph consists of a long, narrow capillary column with a polysiloxane coating on the inner wall. The coating...
Sample Preparation for Analysis: Overview
Bulk or large solid samples are typically reduced in size using grinding, crushing, or milling techniques to increase the...
Gas Chromatography: Introduction
In GC, a sample is vaporized and mixed with an inert carrier gas (the mobile phase), which transports it through a column.
Gas Chromatography: Types of Columns and Stationary Phases
For an analyte to remain on the column for a sufficient amount of time, it must exhibit some level of compatibility (or...
