Related Experiment Video
Updated: Aug 4, 2026

Use of Two Intracorporeal Ventricular Assist Devices As a Total Artificial Heart
Published on: May 11, 2018
Design of a DSP controller for an innovative ventricular assist system
M Fu1, L Xu, A Medvedev
1Department of Electrical Engineering, Ohio State University, Columbus 43210, USA.
Abstract:
The design and development of the digital signal processor controller for an innovative ventricular assist system is presented. A DSP56005 is used as the central processor, with other peripheral components. System hardware and software were developed through the advanced development system, and stand alone operation of the system was also accomplished. Two different control modes--current control mode and speed control mode--were developed and investigated. Performance of efficiency and dynamic response were examined through experimental testing.
More Related Videos
Related Concept Videos
PD Controller: Design
Designing a continuous-data controller requires selecting and linking components like adders and integrators, which are fundamental in Proportional,...
Mechanical Ventilation I: Indication and Settings
Mechanical Ventilation II: Invasive Ventilation
Negative-Pressure Ventilators
Negative-pressure ventilators create a vacuum around the chest or body to draw air into the lungs, simulating breathing. This method does not require an...
Mechanical Ventilation III: Noninvasive Ventilation
Noninvasive Positive-Pressure Ventilation (NIPPV)
Cardiomyopathy V: Interprofessional Care

