Related Experiment Video
Updated: Oct 7, 2026

Rapid Mix Preparation of Bioinspired Nanoscale Hydroxyapatite for Biomedical Applications
Published on: February 23, 2017
Effect of calcium carbonate on clinical compliance of apatitic calcium phosphate bone cement
I Khairoun1, M G Boltong, F C Driessens
1Department of Materials Science and Metallurgy, Universitat Politècnica de Catalunya, Barcelona, Spain. Ibrahim@CMEM.UPC.es
Abstract:
Clinical requirements for calcium phosphate bone cements were formulated in terms of the initial setting time, the final setting time, the cohesion time, and the ultimate compressive strength. Two cement formulations were tested. Biocement F was made of a powder containing alpha-tertiary calcium phosphate, precipitated hydroxyapatite, and monetite. Biocement D powder also contained CaCO3. The liquid/powder (L/P) ratio of the cement paste and the accelerator concentrations (% Na2HPO4) in the cement liquid were varied. For Biocement F there was a small area of combinations of L/P ratio and percent Na2HPO4 for which all clinical requirements were satisfied. This area covered only pastes that could be applied as doughs. However, Biocement D showed a much larger area of full compliance and it covered both doughlike and injectable pastes.
Related Concept Videos
Factors Affecting Solubility
Essential Minerals for Bone Health
Calcium and Phosphorus
Calcium is a critical component of bones, especially in the form of calcium phosphate and calcium carbonate. Since the body cannot make calcium, it must be obtained from the diet. However, calcium cannot be absorbed from the small intestine without...
Hydration of Cement
Soundness of Cement
Porosity in Cement Paste
The balance of water to cement in the mix is critical—it...
Carbonation Shrinkage
The concrete's permeability is slightly reduced as calcium carbonate produced during the reaction fills its pores. Furthermore, its strength is slightly enhanced as the water released during the reaction facilitates the...

