Biomechanical characterization of a biodegradable calcium phosphate hydraulic cement: a comparison with porous...

Biomechanical properties of a biodegradable calcium phosphate hydraulic cement (CPHC) were tested with rabbits. The cement was composed of beta-tricalcium phosphate (beta-TCP), monocalcium phosphate monohydrate (MCPM), and calcium sulfate hemihydrate (CSH), beta-TCP-MCPM-CSH cement. Cylinders of 4.7 mm in diameter and 10 mm in length were put into bone cavities created in the distal epiphysis of femurs in rabbits. Cylinders of the same size of porous biphasic calcium phosphate ceramics (BCPC, 75% hydroxyapatite and 25% beta-TCP) were implanted as references. Two, 4, 12, and 16 weeks after the operation, the rabbits were sacrificed. Histomorphometry showed that the cement was resorbed, leaving only 7.67 +/- 1.81% of bone cavity after 12 weeks. Newly formed bone occupied 34.59 +/- 4.00% of the cavity. Cylindrical bone-material composites were cut out with a small dental burr. Compressive force was applied to the specimens and compressive strength, elastic modulus, and toughness were calculated. The same tests were performed on cylinders of normal bone from the same site, which served as controls. The compressive strength and the toughness of the cement-bone composite were higher than those of normal bone and porous ceramics 12 weeks after the operation (p < 0.05). At 16 weeks the compressive strength and the toughness returned to the normal bone values. The elastic modulus of the porous ceramic-bone composite was higher than the normal bone at 4, 12, and 16 weeks after surgery (p < 0.05). We found that the beta-TCP-MCPM-CSH cement is replaced by new bone and that the cement-new bone composite has similar or better mechanical properties than normal bone within 16 weeks. This study suggests the usefulness of a particular cement for filling bone defects or for temporary fixation of orthopedic implants.