Developments in cardiovascular ultrasound: Part 1: Signal processing and instrumentation

One of the major contributions to the improvement of spectral Doppler and colour flow imaging instruments has been the development of advanced signal-processing techniques made possible by increasing computing power. Model-based or parametric spectral estimators, time-frequency transforms, station-arising algorithms and spectral width correction techniques have been investigated as possible improvements on the FFT-based estimators currently used for real-time spectral estimation of Doppler signals. In colour flow imaging some improvement on velocity estimation accuracy has been achieved by the use of new algorithms but at the expense of increased computational complexity compared with the conventional autocorrelation method. Polynomial filters have been demonstrated to have some advantages over IIR filters for stationary echo cancellation. Several methods of velocity vector estimation to overcome the problem of angle dependence have been studied, including 2D feature tracking, two and three beam approaches and the use of spectral width in addition to mean frequency. 3D data acquisition and display and Doppler power imaging have also been investigated. The use of harmonic imaging, using the second harmonic generated by encapsulated bubble contrast media, seems promising particularly for imaging slow flow. Parallel image data acquisition using non-sequential scanning or broad beam transmission, followed by simultaneous reception along a number of beams, has been studied to speed up 'real-time' imaging.