Study of creep behavior of ultra-high-molecular-weight polyethylene systems
Related Experiment Video
Updated: Oct 30, 2026

Synthesis of Programmable Main-chain Liquid-crystalline Elastomers Using a Two-stage Thiol-acrylate Reaction
Published on: January 19, 2016
M Deng1, R A Latour, A A Ogale
1Department of Bioengineering, Clemson University, South Carolina 29634, USA.
Abstract:
The short- and long-term creep behaviors of ultra-high-molecular-weight polyethylene (UHMWPE) systems (compression-molded UHMWPE sheets and self-reinforced UHMWPE composites) have been investigated. The short-term (30-120 min) creep experiment was conducted at a load of 1 MPa and a temperature range of 37-62 degrees C. Based on short-term creep data, the long-term creep behavior of UHMWPE systems at 1 MPa and 37 degrees C was predicted using time-temperature superposition and analytical formulas. Compared to actual long-term creep experiments of up to 110 days, the predicted creep values were found to well describe the creep properties of the materials. The creep behaviors of the UHMWPE systems were then evaluated for a creep time of longer than 10 years, and it was found that most creep deformation occurs in the early periods. The shift factors associated with time-temperature superposition were found to increase with increasing temperature, as per the Arrhenius equation. The effects of temperature, materials, and load on the shift factors could be explained by the classical free volume theory.
Related Concept Videos
Creep in Concrete
Effects of Creep
Plastic Behavior
Molecular Weight of Step-Growth Polymers
As the step-growth polymerization involves step-wise condensation of monomers, the molecular weight also builds up eventually. Consequently, high molecular weight polymers are obtained at the late stages of the polymerization, where 99% of monomers have been consumed.
The extent of the...
Polymers: Molecular Weight Distribution
Factors Affecting Creep
Further, the water/cement ratio is critical, as a lower ratio increases concrete strength, thus reducing creep. The strength of the...

