Related Experiment Video
Updated: Mar 23, 2026

Rapid Freezing using Sandwich Freezing Device for Good Ultrastructural Preservation of Biological Specimens in Electron Microscopy
Published on: July 19, 2021
X-ray microscopy: preparations for studies of frozen hydrated specimens
A Osanna1, C Jacobsen, A Kalinovsky
1Department of Physics, S.U.N.Y. at Stony Brook 11794-3800, USA. osanna@xray1.physics.sunysb.edu
Abstract:
X-ray microscopes provide higher resolution than visible light microscopes. Wet, biological materials with a water thickness of up to about 10 microns can be imaged with good contrast using soft X-rays with wavelengths between the oxygen and carbon absorption edges (at 24 and 43 A). The Stony Brook group has developed and operates a scanning transmission X-ray microscope (STXM) at the National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory. The microscope is used for imaging with a current resolution of 50 nm, and for elemental and chemical state mapping. Radiation damage imposes a significant limitation upon high resolution X-ray microscopy of room temperature wet specimens. Experience from electron microscopy suggests that cryo techniques allow vitrified specimens to be imaged repeatedly. This is due to the increased radiation stability of biological specimens in the frozen hydrated state. Better radiation stability has been shown recently with a cryo transmission X-ray microscope developed by the University of Göttingen, operating at the BESSY storage ring in Berlin, Germany. At Stony Brook, we are developing a cryo scanning transmission X-ray microscope (CryoSTXM) to carry out imaging and spectro-microscopy experiments on frozen hydrated specimens. This article will give an outlook onto the research projects that we plan to perform using the CryoSTXM.
More Related Videos
Related Concept Videos
Preparation of Samples for Electron Microscopy
Fixation and Sectioning
The simplest type of preparation is the wet mount, in which the specimen is placed in a drop of liquid on the slide. A liquid specimen can be directly deposited on the slide using a dropper. Solid specimens, such as skin scraping, can be placed on the slide before adding a drop of liquid to prepare the wet mount. Sometimes the liquid is simply water, but stains are often added...
Cryo-electron Microscopy

