Estimating cochlear filter response properties from distortion product otoacoustic emission (DPOAE) phase delay...

This study examined cochlear filter response properties derived from f1- and f2-sweep phase delay difference measures in 60 normal hearing human adults. Seven different f2 frequencies ranging from 1.1 to 9.2 kHz were presented (f2/f1 ratios of 1.1-1.3). F2 intensity level was varied in 5 dB steps from 30 to 50 dB SPL (the level of f1 was 15 dB above the level of f2). DPOAE delay estimates in a f2-sweep paradigm are longer than in a f1-sweep paradigm at the same frequency and intensity. This indicates that the f2-sweep DPOAE phase delay is composed of a greater proportion of the filter response time at the site of DPOAE generation than the f1-sweep delay. This proportion was isolated by subtracting f1-sweep DPOAE delays from f2-sweep delays at similar f2 frequencies and intensities. Under the assumption of linearity and minimum phase the impulse response of the filter at each f2 stimulus level was calculated from the mean phase delay difference. Frequency response properties were calculated by Fourier transformation of the impulse response at each f2 frequency and intensity. High frequency low intensity impulse responses had longer response times and narrower frequency bandwidths than low frequency high intensity responses. The Q10dB values of DPOAE derived tuning curves ranged from 2.4 (1.5 kHz) to 7.3 (8.5 kHz).