Radiographic inspection of dental castings

Underdimensioning may adversely affect the clinical use of a crown or bridge. Insufficient dimensions may be due to inadequate modelling or deficiencies caused by the casting process. The dimensions of cast objects are measured mechanically using a calliper. This method has often proved to be insufficient in detecting areas of too small dimensions. This paper presents a non-destructive method of inspecting dental castings using radiography. The occlusal thickness of a random sample of 150 crowns made during regular clinical treatment in our department was inspected mechanically and radiographically. We found that 19% of the crowns were only 0.1 mm thick or less at the thinnest spot, 18% were between 0.1 and 0.2 mm and 9% were between 0.2 and 0.3 mm. In comparison to mechanical examination, radiographic inspection usually showed smaller values.