Related Experiment Video
Updated: Aug 18, 2026
Proximal Cadaveric Femur Preparation for Fracture Strength Testing and Quantitative CT-based Finite Element Analysis
Published on: March 11, 2017
The acoustic and structural properties of the human femur
S Weiss1, M C Zimmerman, R D Harten
1Department of Orthopaedics, NJ Medical School, Newark 07103, USA.
Abstract:
This study evaluates the variations in the acoustic properties of the human femur at ten evenly spaced locations along its length, as well as differences that exist within given transverse sections. Six pairs of human femora, three male and three female, were sectioned, ground, and polished, and scanned with a microprocessor-driven scanning acoustic microscope. Images with a resolution of approximately 140 microns were used to calculate the average acoustic impedances for each transverse cross section and each quadrant within a cross section. The mean acoustic impedance for all the cross sections was 7.69 +/- 0.18 Mrayls. Variations were observed among the cross sections, and the central sections (4-7) had values that were statistically greater than the other more distal and proximal sections. Within the cross sections, the posterior quadrant had a lower average acoustic impedance compared to the other quadrants and this was statistically significant (Tukey's multiple comparison test). The cross sections were further analyzed to determine several geometric parameters including the principal moments of inertia, polar moment of inertia, and the biomechanical shape index. The product of the acoustic impedance and the maximum moment of inertia provided a result that attempted to account for the acoustic property variation and the change in shape at the different section locations.
Related Concept Videos
01:18Classification of Bones
Long and Short Bones
The appendicular skeleton, particularly the upper and lower limbs, is primarily made of long and short bones. The long...
01:17Gross Anatomy of Bone
The diaphysis is the tubular shaft that runs between the proximal and distal ends of the bone. The walls of the diaphysis are composed of dense and hard compact bone made of numerous osteons — the functional unit of the compact bone. The hollow region in the diaphysis is called the medullary cavity, which harbors the bone marrow. In infants and children, this marrow cavity is filled with red marrow, whereas in adults, it...
01:27Compact Bone
Compact bone, also called cortical bone, is the denser, stronger of the two types of bone tissue. It is found under the periosteum and in the diaphyses of long bones, where it provides support and protection. The microscopic structural unit of compact bone is called an osteon, or haversian system. Each osteon is composed of concentric rings of calcified...
01:16Bones of the Lower Limb: Femur and Patella
01:20Introduction to the Skeletal System
Components of the Skeletal System
Bone, or osseous tissue, is a hard connective tissue that forms an internal support structure for the human body. Bones shield vulnerable organs and soft tissue from external forces. For example, the vertebral bones protect and support the spinal cord.
Cartilage, a semi-rigid connective tissue found in regions such as...
01:09Spongy Bone
Spongy bone is more porous, and less dense compared to compact bone. It is composed of concentric lamellae that are arranged irregularly to form the trabecular network. In some bones, the spaces between trabeculae contain red marrow, where...