On-the-fly fluorescence lifetime detection of dye-labeled DNA primers for multiplex analysis

Mixtures of dye-labeled, M13-forward DNA primers were separated by capillary gel electrophoresis and detected on-the-fly, using fluorescence lifetime measurements, to evaluate four-decay detection for multiplex DNA sequencing. Three different four-dye systems were used, two that were excited at 488 nm and one that was excited at 514 nm. Each dye-labeled primer was identified on the basis of the lifetime of the conjugated dye using nonlinear least squares or the maximum entropy method to analyze the lifetime data. Overlapping electrophoretic peaks were generated by making multiple injections of mixtures of the dye-labeled primers. The overlapping peaks were resolved by fitting the data to two-, three- or four-component lifetime models used in nonlinear least-squares analysis in which each lifetime component was fixed to the predetermined lifetime of the corresponding dye-labeled primer. In two of the dye systems, the lifetimes of the four dye-labeled primers were sufficiently different to allow peak resolution. In the other dye system, addition of 10% DMSO to the run buffer changed the lifetime of one dye-labeled primer, allowing it to be resolved from another dye-labeled primer with similar lifetime.