Chemiluminescence flow-through sensor for copper based on an anodic stripping voltammetric flow cell and an...

A novel chemiluminescence (CL) flow-through sensor based on immobilizing all the ingredients involved in the analytical reaction for the determination of copper is proposed. The analytical reagents including luminol and cyanide were coimmobilized permanently on an anion-exchange column, while the analyte copper was retained temporarily by electrochemical preconcentration on a gold electrode placed in an anodic stripping voltammetric flow cell. By injection of a volume of sodium hydroxide through the column with immobilized reagents, luminol and cyanide were eluted from the resins in alkaline aqueous solution and then reacted with copper stripped from the gold electrode to produce a CL signal, by means of which copper could be sensed. The sensor was not susceptible to interference by other metal ions associated with the CL reaction. The response to the concentration of copper was linear in the range of 0.01-10 micrograms/L and an extremely low detection limit of 8.0 x 10(-3) micrograms/L was achieved. A complete analysis could be performed in 4 min with a relative standard deviation of less than 8%. The column with immobilized reagents was readily prepared and could be reused over 200 times. The sensor was applied successfully to the determination of copper in human serum and natural water samples.