[Intraoperative CT imaging system using a mobile CT scanner gantry mounted on floor-embedded rails for neurosurgery]

Many neurosurgeons prefer to use intraoperative computed tomographic (CT) scanning, when possible, to check whether there is residual lesion or unexpected bleeding. We report a practical intraoperative CT imaging system using a high-speed CT scanner installed in the operating room along with a digitally controlled neurosurgical operating table. We designed a rail-track system to mobilize the CT gantry. The gantry is fixed onto a motorized carrier that can be moved smoothly on a rail-track embedded in the floor and with a maximum reach of 2.85 m from the room's wall to the operating table. The longitudinal motion of the operating table is easily adjusted by a foot switch from manual control to automatic control directly from the CT scanner's computer like an ordinary CT scanner bed in increments of 2, 5 or 10 mm during CT scanning. Either a carbon-made radiolucent head frame or carbon-made head plate is used as a headrest. Using this CT scanner system, pre- and intraoperative CT scannings were performed on 46 patients with brain tumors, cervical lesions or other intracranial lesions. We could operate on the patient with enough working space between the mobile CT gantry and the operating table for microneurosurgery. We could obtain intraoperative CT imaging of a patient on the operating table while the surgical wound remained open, the surgical drapes kept in place, and the surgical position unchanged, saving time in intraoperative CT scanning and preparation for further surgery when needed. This intraoperative CT imaging system installed in the operating room should be useful for neurosurgery.