Video Experimental Relacionado

Updated: Aug 1, 2026

Fabrication, Densification, and Replica Molding of 3D Carbon Nanotube Microstructures
09:23

Fabrication, Densification, and Replica Molding of 3D Carbon Nanotube Microstructures

Published on: July 2, 2012

Nanotubos de roseta helicoidal con estabilidad ajustable y jerarquía

Jesus G Moralez1, Jose Raez, Takeshi Yamazaki

  • 1National Institute for Nanotechnology (NINT-NRC), Department of Chemistry, University of Alberta, ECERF 9107-116 Street, Edmonton, Alberta T6G 2V4, Canada.

Journal of the American Chemical Society
|June 9, 2005
PubMed
Resumen

Los investigadores desarrollaron nanotubos de roseta helicoidales sintonizables (HRNs) para aplicaciones biomédicas. Esta nueva clase de materiales nanoestructurados ofrece una estabilidad controlable y una arquitectura jerárquica para la nanomedicina avanzada.

Más Videos Relacionados

Fabrication of Low Temperature Carbon Nanotube Vertical Interconnects Compatible with Semiconductor Technology09:20

Fabrication of Low Temperature Carbon Nanotube Vertical Interconnects Compatible with Semiconductor Technology

Published on: December 7, 2015

Nanosponge Tunability in Size and Crosslinking Density11:15

Nanosponge Tunability in Size and Crosslinking Density

Published on: August 4, 2017

Videos de Conceptos Relacionados

Assembly of Complex Microtubule Structures01:32

Assembly of Complex Microtubule Structures

Complex microtubule structures are present in resting cells and in dividing cells. In resting cells, they are responsible for maintaining the cellular architecture, tracks for intracellular transport, positioning of organelles, assembly of cilia and flagella. They mediate the bipolar spindle assembly for chromosomal segregation and positioning of the cell division plate in dividing cells. The formation of microtubule complex structures depends on the cell type, cell stage, and cell function.
Toroids01:28

Toroids

A toroid is a closely wound donut-shaped coil constructed using a single  conducting wire. In general, it is assumed that a toriod consists of  multiple circular loops perpendicular to its axis.
When connected to a supply, the magnetic field generated in the toroid has field lines circular and concentric to its axis. Conventionally, the direction of this magnetic field is expressed using the right-hand rule. If the fingers of the right hand curl in the current direction, the thumb points in the...
Circular Shafts - Elastoplastic Materials01:24

Circular Shafts - Elastoplastic Materials

The study of solid circular shafts under stress shows that within the elastic limit, stress increases directly to the distance from the shaft's center. This relationship holds until the shaft reaches a critical point of stress, beyond which it begins to yield, marking the transition from elastic to plastic deformation. At this crucial juncture, the maximum torque the shaft can endure without permanent deformation is determined, signifying the limit of its elastic behavior.
As torque on the...
Torsion of Noncircular Members01:16

Torsion of Noncircular Members

Circular shafts undergoing torsional stress maintain their cross-sectional integrity due to their axisymmetric nature. This symmetry ensures an even distribution of stress, allowing the shaft to withstand torsion without distorting. In contrast, square bars, lacking this axial symmetry, experience significant distortion across their cross-sections when subjected to torsion, with the exception of along their diagonals and at lines connecting midpoints. A detailed examination of a cubic element...
Thin-Walled Hollow Shafts01:15

Thin-Walled Hollow Shafts

In analyzing a thin-walled hollow shaft subjected to torsional loading, a segment with width dx is isolated for examination. Despite its equilibrium state, this segment faces torsional shearing forces at its ends. These forces are quantitatively described by the product of the longitudinal shearing stress on the segment's minor surface and the area of this surface, leading to the concept of shear flow. This shear flow is consistent throughout the structure, indicating a uniform distribution of...
Unsymmetric Bending - Angle of Neutral Axis01:15

Unsymmetric Bending - Angle of Neutral Axis

Unsymmetrical bending occurs when a structural member is subjected to bending moments in a plane that does not align with the member's principal axes. This scenario typically arises in beams and other structural components when loads are applied at non-ideal angles, introducing complexities in stress analysis.
When a bending moment is applied at an angle θ concerning the vertical axis of a symmetrical member, it can be resolved into components along the member's principal centroidal axes. The...