Desarrollo de un método de cálculo de la huella de carbono para el ciclo de vida del producto basado en un diseño de

Yuwei Zhang1,2, Shanliang Yao1,3, Yantao Chen1

  • 1School of Art and Design, Wuhan Institute of Technology, Wuhan, China.

PloS one
|August 20, 2025
PubMed
Resumen

Este estudio desarrolló un método de cálculo de la huella de carbono del ciclo de vida de los altavoces Bluetooth. La fase de uso tiene un impacto significativo en las emisiones totales de carbono, lo que pone de relieve la necesidad de mejorar la eficiencia energética de los productos electrónicos.

Videos de Conceptos Relacionados

Design Example01:23

Design Example

The innovation of touch-tone telephony revolutionized the telecommunications industry by replacing the traditional rotary dial with a dual-tone multi-frequency (DTMF) signaling system. This system uses a matrix-style keypad with buttons arranged in four rows and three columns, creating 12 distinct signals each assigned to a pair of frequencies. Each button press results in a simultaneous generation of two sinusoidal tones – one from a low-frequency group (697 to 941 Hz) and one from a...
372
Design Example: Sustainability in Concrete Building01:26

Design Example: Sustainability in Concrete Building

As the construction industry moves towards more eco-friendly practices, concrete's adaptability and its ability to incorporate sustainable features make it a key material in the drive towards greener building solutions.
There are multiple approaches to achieve sustainability in a commercial concrete building. For instance, construct a concrete parking area under the building, utilizing pervious concrete paver blocks in open areas to facilitate rainwater collection through an underground...
226
Design Example: Calculating Safe Diameter for Wind-Exposed Disc01:17

Design Example: Calculating Safe Diameter for Wind-Exposed Disc

Assessing safety in wind-exposed installations is crucial to preventing potential failures. This example explores the calculation and design adjustments needed to mount a circular disc on a building facade, where wind forces are a primary concern. A 4-meter diameter disc was initially designed as an aesthetic feature facing winds at a velocity of 25 meters per second, with an air density of 1.25 kilograms per cubic meter. Given these conditions, the drag force on the disc was determined using...
177