Video Experimental Relacionado

Updated: Jan 8, 2026

Automatic Laser-based Geometry Capture for Finite Element Analysis of Weld Beads
07:58

Automatic Laser-based Geometry Capture for Finite Element Analysis of Weld Beads

Published on: July 25, 2025

723

Array de haz de modelo de Schell Hermite-Gauss retorcido anistrópico radial y su influencia por efectos de

Yong Wu, Tianbao Tao, Jun Qu

    Optics express
    |December 19, 2025
    PubMed
    Resumen

    Introducimos un novedoso array de haz de modelo de Schell Hermite-Gauss retorcido anistrópico radial (RATHGSMBA). Esta nueva fuente de haz parcialmente coherente exhibe patrones únicos de división, rotación e interferencia en turbulencia no Kolmogorov.

    Palabras clave:
    array de hazhaz parcialmente coherentemodelo de Schell Hermite-Gauss retorcido anistrópico radialturbulencia no Kolmogorovóptica y fotónicafísica láserinvestigación de turbulencia

    Más Videos Relacionados

    Experimental Investigation of Secondary Flow Structures Downstream of a Model Type IV Stent Failure in a 180° Curved Artery Test Section11:00

    Experimental Investigation of Secondary Flow Structures Downstream of a Model Type IV Stent Failure in a 180° Curved Artery Test Section

    Published on: July 19, 2016

    11.9K
    The Generation of Higher-order Laguerre-Gauss Optical Beams for High-precision Interferometry12:14

    The Generation of Higher-order Laguerre-Gauss Optical Beams for High-precision Interferometry

    Published on: August 12, 2013

    22.4K

    Videos de Conceptos Relacionados

    Distribution of Stresses in a Narrow Rectangular Beam01:11

    Distribution of Stresses in a Narrow Rectangular Beam

    In studying beam stress distribution, examining an elemental section is essential. To determine the average shearing stress on this face, the calculated shear is divided by the surface area. Importantly, shearing stresses on the beam's transverse and horizontal planes mirror each other, indicating a consistent stress distribution along the upper region of the beam. Notably, shearing stresses are absent at the beam's upper and lower surfaces due to the absence of applied forces in these...
    468
    Shearing Stresses in a Beam: Problem Solving01:14

    Shearing Stresses in a Beam: Problem Solving

    A cantilever beam with a rectangular cross-section under distributed and point loads experiences shearing stresses. The analysis begins by identifying the loads acting on the beam. Then, the reactions at the beam's fixed end are calculated using equilibrium equations. The vertical reaction is a combination of the distributed and point loads, while the moment reaction is the sum of their moments. The shear force distribution along the beam, resulting from these loads, is established by creating...
    589
    Shear on the Horizontal Face of a Beam Element01:16

    Shear on the Horizontal Face of a Beam Element

    To understand shear on the flat side of a prismatic beam element, consider the vertical and horizontal shearing forces, and the normal forces, acting on the element. The element's upper (U) and lower (L) sections, which are divided by the beam's neutral axis, are examined. The equilibrium of these forces is determined by applying the equilibrium equation, which helps identify the horizontal shearing force. This force is directly related to the bending moments and the cross-section's...
    490
    Design of Prismatic Beams for Bending01:23

    Design of Prismatic Beams for Bending

    The design of prismatic beams, structural elements with a uniform cross-section, focuses on ensuring safety and structural integrity under load. The design process begins by determining the allowable stress, either from material properties tables, or by dividing the material's ultimate strength by a safety factor. This safety factor is essential for accommodating uncertainties, and varies depending on the material—timber, steel, or concrete—with each having unique strength and...
    591
    Relation between Poisson's ratio, Modulus of Elasticity and Modulus of Rigidity01:15

    Relation between Poisson's ratio, Modulus of Elasticity and Modulus of Rigidity

    Deformation occurs in axial and transverse directions when an axial load is applied to a slender bar. This deformation impacts the cubic element within the bar, transforming it into either a rectangular parallelepiped or a rhombus, contingent on its orientation. This transformation process induces shearing strain. Axial loading elicits both shearing and normal strains. Applying an axial load instigates equal normal and shearing stresses on elements oriented at a 45° angle to the load axis.
    523
    Torsion of Noncircular Members01:16

    Torsion of Noncircular Members

    Circular shafts undergoing torsional stress maintain their cross-sectional integrity due to their axisymmetric nature. This symmetry ensures an even distribution of stress, allowing the shaft to withstand torsion without distorting. In contrast, square bars, lacking this axial symmetry, experience significant distortion across their cross-sections when subjected to torsion, with the exception of along their diagonals and at lines connecting midpoints. A detailed examination of a cubic element...
    514