Sistema microfluídico de RT-LAMP de baja potencia con detección de fluorescencia en tiempo real para pruebas de...

A microfluidic reverse transcription loop-mediated isothermal amplification (RT-LAMP) platform is presented featuring integrated real-time fluorescence detection and optimized thermal control. Magnetic bead-based RNA extraction was paired with a thermally insulated reaction chip operated under vacuum to suppress heat loss. Additional energy-saving strategies, including reduced wire cross-section and low-emissivity surface treatment, reduced total power consumption from (2.00 ± 0.08) W to (0.29 ± 0.01) W, corresponding to an 85.5 % reduction. Amplification was completed within 20 min, and positive fluorescence signals were detected in less than 11 min. Although LAMP reagents remain more expensive than those used in PCR, the substantial energy savings and system simplification demonstrated here support practical battery-powered operation. The RT-LAMP chemistry used in this system matched a previously validated configuration, which achieved a limit of detection of 256 RNA copies and a signal slope of (- 1.70 ± 0.20) dec.min⁻¹. These parameters remained consistent under the current setup, as power consumption did not influence detection sensitivity provided the reaction temperature was maintained. The platform enables low-power, real-time nucleic acid detection suited for decentralized diagnostics, forensic screening, and environmental monitoring.